Hello people, After playing a lot with the deb packaging system the GeoNode installers for Ubuntu seem to be in pretty good shape (thanks everyone for the much needed feedback). I need help for 3 different types of situations: #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) This is the case that I have been testing and troubleshooting: sudo apt-get install python-software-properties sudo add-apt-repository ppa:ingenieroariel/ppa sudo apt-get update sudo apt-get -y install geonode #2 People who have successfully installed it via the APT repo or my Launchpad PPA and would like to perform an update, I am especially interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that would help me understand what kind of issues may be with the update to 1.1+final), note that the instructions may end up upgrading other packages apart from geonode, beware. sudo apt-get install python-software-properties sudo add-apt-repository ppa:ingenieroariel/ppa sudo apt-get update sudo apt-get upgrade #3 (This is for the bravest kind) People who have a system with other packages / servers installed (Like Postgres or Tomcat) and would like to try the GeoNode packages there. Please only do this if you have virtual images that you can copy without worrying about losing data, the packages have not been tested in systems running other things but it is in my best interest to make it work correctly in those cases too. sudo apt-get install python-software-properties sudo add-apt-repository ppa:ingenieroariel/ppa sudo apt-get update sudo apt-get -y install geonode Thanks in advance for anyone who would like to help and report back here, this will hopefully make upgrading easier for all of us in the future. Ariel.
Sorry for the late weigh-in ... Install case #1.5 worked fine! (I had an existing tomcat6 with nothing in it.) Works fine after smoke-testing. Will tell more after heavier use. SFS -----Original Message----- From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of Ariel Nunez Sent: Tuesday, September 20, 2011 10:42 AM To: geonode@librelist.com Subject: [geonode] GeoNode Packages, call for testers. Hello people, After playing a lot with the deb packaging system the GeoNode installers for Ubuntu seem to be in pretty good shape (thanks everyone for the much needed feedback). I need help for 3 different types of situations: #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) This is the case that I have been testing and troubleshooting: sudo apt-get install python-software-properties sudo add-apt-repository ppa:ingenieroariel/ppa sudo apt-get update sudo apt-get -y install geonode #2 People who have successfully installed it via the APT repo or my Launchpad PPA and would like to perform an update, I am especially interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that would help me understand what kind of issues may be with the update to 1.1+final), note that the instructions may end up upgrading other packages apart from geonode, beware. sudo apt-get install python-software-properties sudo add-apt-repository ppa:ingenieroariel/ppa sudo apt-get update sudo apt-get upgrade #3 (This is for the bravest kind) People who have a system with other packages / servers installed (Like Postgres or Tomcat) and would like to try the GeoNode packages there. Please only do this if you have virtual images that you can copy without worrying about losing data, the packages have not been tested in systems running other things but it is in my best interest to make it work correctly in those cases too. sudo apt-get install python-software-properties sudo add-apt-repository ppa:ingenieroariel/ppa sudo apt-get update sudo apt-get -y install geonode Thanks in advance for anyone who would like to help and report back here, this will hopefully make upgrading easier for all of us in the future. Ariel.
Hey, Tested the installation on an Ubuntu 10.04 today and on running sudo apt-get -y install geonode i get could not find the package geonode. On 29 September 2011 17:26, Samuel Smith <samuel@groundlevel.ca> wrote: > Sorry for the late weigh-in ... Install case #1.5 worked fine! (I had an > existing tomcat6 with nothing in it.) > > Works fine after smoke-testing. Will tell more after heavier use. > > SFS > > -----Original Message----- > From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of > Ariel Nunez > Sent: Tuesday, September 20, 2011 10:42 AM > To: geonode@librelist.com > Subject: [geonode] GeoNode Packages, call for testers. > > Hello people, > > After playing a lot with the deb packaging system the GeoNode > installers for Ubuntu seem to be in pretty good shape (thanks everyone > for the much needed feedback). > > I need help for 3 different types of situations: > > #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) > This is the case that I have been testing and troubleshooting: > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get -y install geonode > > #2 People who have successfully installed it via the APT repo or my > Launchpad PPA and would like to perform an update, I am especially > interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that > would help me understand what kind of issues may be with the update to > 1.1+final), note that the instructions may end up upgrading other > packages apart from geonode, beware. > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get upgrade > > #3 (This is for the bravest kind) People who have a system with other > packages / servers installed (Like Postgres or Tomcat) and would like > to try the GeoNode packages there. Please only do this if you have > virtual images that you can copy without worrying about losing data, > the packages have not been tested in systems running other things but > it is in my best interest to make it work correctly in those cases > too. > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get -y install geonode > > > Thanks in advance for anyone who would like to help and report back > here, this will hopefully make upgrading easier for all of us in the > future. > > Ariel. > -- Regards, Jude Mwenda Skype id: jmwenda Twitter: www.twitter.com/judemwenda Web: www.africangeogeek.com "Was ist mein Leben, wenn ich nicht mehr nützlich für andere." Johann Wolfgang von Goethe
Jude, I rebuilt the packages yesterday for that release, they should apear again in less than an hour. Ariel On Oct 3, 2011 7:58 AM, "jude mwenda" <judemwenda@gmail.com> wrote: > Hey, > Tested the installation on an Ubuntu 10.04 today and on running sudo apt-get > -y install geonode i get could not find the package geonode. > > On 29 September 2011 17:26, Samuel Smith <samuel@groundlevel.ca> wrote: > >> Sorry for the late weigh-in ... Install case #1.5 worked fine! (I had an >> existing tomcat6 with nothing in it.) >> >> Works fine after smoke-testing. Will tell more after heavier use. >> >> SFS >> >> -----Original Message----- >> From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of >> Ariel Nunez >> Sent: Tuesday, September 20, 2011 10:42 AM >> To: geonode@librelist.com >> Subject: [geonode] GeoNode Packages, call for testers. >> >> Hello people, >> >> After playing a lot with the deb packaging system the GeoNode >> installers for Ubuntu seem to be in pretty good shape (thanks everyone >> for the much needed feedback). >> >> I need help for 3 different types of situations: >> >> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) >> This is the case that I have been testing and troubleshooting: >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get -y install geonode >> >> #2 People who have successfully installed it via the APT repo or my >> Launchpad PPA and would like to perform an update, I am especially >> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that >> would help me understand what kind of issues may be with the update to >> 1.1+final), note that the instructions may end up upgrading other >> packages apart from geonode, beware. >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get upgrade >> >> #3 (This is for the bravest kind) People who have a system with other >> packages / servers installed (Like Postgres or Tomcat) and would like >> to try the GeoNode packages there. Please only do this if you have >> virtual images that you can copy without worrying about losing data, >> the packages have not been tested in systems running other things but >> it is in my best interest to make it work correctly in those cases >> too. >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get -y install geonode >> >> >> Thanks in advance for anyone who would like to help and report back >> here, this will hopefully make upgrading easier for all of us in the >> future. >> >> Ariel. >> > > > > -- > Regards, > > Jude Mwenda > Skype id: jmwenda > Twitter: www.twitter.com/judemwenda > Web: www.africangeogeek.com > > "Was ist mein Leben, wenn ich nicht mehr nützlich für andere." > Johann Wolfgang von Goethe
Ariel,
perfect installation last week with the four lines of code on Ubuntu 11.04
64 bits.
Just one issue found, related to the geoserver context parameter:
<context-param>
<param-name>GEOSERVER_DATA_DIR</param-name>
<param-value>/var/lib/geoserver/data/</param-value>
</context-param>
If I correctly understood your intention, I think it should be replaced with
<context-param>
<param-name>GEOSERVER_DATA_DIR</param-name>
<param-value>/var/lib/geoserver/geonode-data/</param-value>
</context-param>
GeoNode has then been tested after with data uploading, map creating,
user/permission testing and batch data upload.
No major issues found
Many thanks!!!
Simone
On 20 September 2011 19:42, Ariel Nunez <ingenieroariel@gmail.com> wrote:
> Hello people,
>
> After playing a lot with the deb packaging system the GeoNode
> installers for Ubuntu seem to be in pretty good shape (thanks everyone
> for the much needed feedback).
>
> I need help for 3 different types of situations:
>
> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha)
> This is the case that I have been testing and troubleshooting:
>
> sudo apt-get install python-software-properties
> sudo add-apt-repository ppa:ingenieroariel/ppa
> sudo apt-get update
> sudo apt-get -y install geonode
>
> #2 People who have successfully installed it via the APT repo or my
> Launchpad PPA and would like to perform an update, I am especially
> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that
> would help me understand what kind of issues may be with the update to
> 1.1+final), note that the instructions may end up upgrading other
> packages apart from geonode, beware.
>
> sudo apt-get install python-software-properties
> sudo add-apt-repository ppa:ingenieroariel/ppa
> sudo apt-get update
> sudo apt-get upgrade
>
> #3 (This is for the bravest kind) People who have a system with other
> packages / servers installed (Like Postgres or Tomcat) and would like
> to try the GeoNode packages there. Please only do this if you have
> virtual images that you can copy without worrying about losing data,
> the packages have not been tested in systems running other things but
> it is in my best interest to make it work correctly in those cases
> too.
>
> sudo apt-get install python-software-properties
> sudo add-apt-repository ppa:ingenieroariel/ppa
> sudo apt-get update
> sudo apt-get -y install geonode
>
>
> Thanks in advance for anyone who would like to help and report back
> here, this will hopefully make upgrading easier for all of us in the
> future.
>
> Ariel.
>
I successfully installed from ppa:ingenieroariel/ppa last night (Sept. 19) on Ubuntu Lucid (10.04) 32-bit on Amazon's EC2. Thanks to all for the great work! On Sep 20, 2011, at 10:42 AM, Ariel Nunez wrote: > Hello people, > > After playing a lot with the deb packaging system the GeoNode > installers for Ubuntu seem to be in pretty good shape (thanks everyone > for the much needed feedback). > > I need help for 3 different types of situations: > > #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) > This is the case that I have been testing and troubleshooting: > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get -y install geonode > > #2 People who have successfully installed it via the APT repo or my > Launchpad PPA and would like to perform an update, I am especially > interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that > would help me understand what kind of issues may be with the update to > 1.1+final), note that the instructions may end up upgrading other > packages apart from geonode, beware. > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get upgrade > > #3 (This is for the bravest kind) People who have a system with other > packages / servers installed (Like Postgres or Tomcat) and would like > to try the GeoNode packages there. Please only do this if you have > virtual images that you can copy without worrying about losing data, > the packages have not been tested in systems running other things but > it is in my best interest to make it work correctly in those cases > too. > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get -y install geonode > > > Thanks in advance for anyone who would like to help and report back > here, this will hopefully make upgrading easier for all of us in the > future. > > Ariel.
Hi guys, I installed GeoNode on Ubuntu using the four commands given by Ariel on a freshly installed Ubuntu 11.4. I would like to ask you how can I specify my IP address in order to allow the access to the GeoNode for others users over Internet ? I edited the /etc/geonode/local_setting.py file and changed the localhost by the IP of my server ( SITEURL = 'http://xx.yyy.zz.aaa'), as recommended in the official document, I got access to Geonode through the Intranet, but no access from INTERNET. Many thanks Adam Date: Wed, 21 Sep 2011 12:00:57 -0400 From: ingenieroariel@gmail.com Subject: Re: RE: [geonode] GeoNode Packages, call for testers. To: geonode@librelist.com Adam, you can create a superuser by doing: geonode createsuperuser And change the local server name in the SITEURL parameter in /etc/geonode/local_settings.py These, and other things you should do after the install are in the latest version of the docs/deploy/production document. Ariel On Sep 21, 2011 11:47 AM, "Adam Mar" <hic030@hotmail.com> wrote: > > Hi Ariel, > I installed the GeoNode successfully using the 4 lines on a freshly installed Ubuntu 11.04. there is only a small issue concerning the server name, administrator name and password. During the installation process, these three parameters are not asked (as it was the case when we use the 8 lines). So when I run geonode I'm not able to sign in as administrator. I tried the "admin" as Administrator name and also as password but it isn't accepted. > Regards and many thanks > Adam > Date: Wed, 21 Sep 2011 08:06:47 -0400 > From: ingenieroariel@gmail.com > Subject: Re: RE: [geonode] GeoNode Packages, call for testers. > To: geonode@librelist.com > > Adam, > You can use only the four lines, the ones you mentioned are what I do to build them (in fact I do more steps, since I also build the geonode release tarball). > On Sep 21, 2011 7:01 AM, "Adam Mar" <hic030@hotmail.com> wrote: >> >> Hi Ariel, >> I will test the installation this afternoon on a freshly installed Ubuntu 11.04, and I would like to ask you if we should use only the four lines or start by the others comand like: > >> >> sudo apt-get install -y git-core debhelper devscripts >> git clone git://github.com/GFDRR/geonode-deb.git >> cd geonode-deb >> wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz > >> tar zxvf GeoNode-1.1-beta2.tar.gz >> debuild --no-lintian -us -uc >> sudo dpkg -i ../geonode_1.1.beta+2_all.deb >> sudo apt-get install -f >> Many thanks >> Adam >> >> >>> Date: Tue, 20 Sep 2011 13:42:16 -0400 > >>> From: ingenieroariel@gmail.com >>> Subject: [geonode] GeoNode Packages, call for testers. >>> To: geonode@librelist.com > >>> >>> Hello people, >>> >>> After playing a lot with the deb packaging system the GeoNode >>> installers for Ubuntu seem to be in pretty good shape (thanks everyone >>> for the much needed feedback). > >>> >>> I need help for 3 different types of situations: >>> >>> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) >>> This is the case that I have been testing and troubleshooting: > >>> >>> sudo apt-get install python-software-properties >>> sudo add-apt-repository ppa:ingenieroariel/ppa >>> sudo apt-get update >>> sudo apt-get -y install geonode >>> > >>> #2 People who have successfully installed it via the APT repo or my >>> Launchpad PPA and would like to perform an update, I am especially >>> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that > >>> would help me understand what kind of issues may be with the update to >>> 1.1+final), note that the instructions may end up upgrading other >>> packages apart from geonode, beware. >>> > >>> sudo apt-get install python-software-properties >>> sudo add-apt-repository ppa:ingenieroariel/ppa >>> sudo apt-get update >>> sudo apt-get upgrade >>> >>> #3 (This is for the bravest kind) People who have a system with other > >>> packages / servers installed (Like Postgres or Tomcat) and would like >>> to try the GeoNode packages there. Please only do this if you have >>> virtual images that you can copy without worrying about losing data, > >>> the packages have not been tested in systems running other things but >>> it is in my best interest to make it work correctly in those cases >>> too. >>> >>> sudo apt-get install python-software-properties > >>> sudo add-apt-repository ppa:ingenieroariel/ppa >>> sudo apt-get update >>> sudo apt-get -y install geonode >>> >>> >>> Thanks in advance for anyone who would like to help and report back > >>> here, this will hopefully make upgrading easier for all of us in the >>> future. >>> >>> Ariel. >> >
Hi Ariel, I installed the GeoNode successfully using the 4 lines on a freshly installed Ubuntu 11.04. there is only a small issue concerning the server name, administrator name and password. During the installation process, these three parameters are not asked (as it was the case when we use the 8 lines). So when I run geonode I'm not able to sign in as administrator. I tried the "admin" as Administrator name and also as password but it isn't accepted. Regards and many thanks Adam Date: Wed, 21 Sep 2011 08:06:47 -0400 From: ingenieroariel@gmail.com Subject: Re: RE: [geonode] GeoNode Packages, call for testers. To: geonode@librelist.com Adam, You can use only the four lines, the ones you mentioned are what I do to build them (in fact I do more steps, since I also build the geonode release tarball). On Sep 21, 2011 7:01 AM, "Adam Mar" <hic030@hotmail.com> wrote: > > Hi Ariel, > I will test the installation this afternoon on a freshly installed Ubuntu 11.04, and I would like to ask you if we should use only the four lines or start by the others comand like: > > sudo apt-get install -y git-core debhelper devscripts > git clone git://github.com/GFDRR/geonode-deb.git > cd geonode-deb > wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz > tar zxvf GeoNode-1.1-beta2.tar.gz > debuild --no-lintian -us -uc > sudo dpkg -i ../geonode_1.1.beta+2_all.deb > sudo apt-get install -f > Many thanks > Adam > > >> Date: Tue, 20 Sep 2011 13:42:16 -0400 >> From: ingenieroariel@gmail.com >> Subject: [geonode] GeoNode Packages, call for testers. >> To: geonode@librelist.com >> >> Hello people, >> >> After playing a lot with the deb packaging system the GeoNode >> installers for Ubuntu seem to be in pretty good shape (thanks everyone >> for the much needed feedback). >> >> I need help for 3 different types of situations: >> >> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) >> This is the case that I have been testing and troubleshooting: >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get -y install geonode >> >> #2 People who have successfully installed it via the APT repo or my >> Launchpad PPA and would like to perform an update, I am especially >> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that >> would help me understand what kind of issues may be with the update to >> 1.1+final), note that the instructions may end up upgrading other >> packages apart from geonode, beware. >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get upgrade >> >> #3 (This is for the bravest kind) People who have a system with other >> packages / servers installed (Like Postgres or Tomcat) and would like >> to try the GeoNode packages there. Please only do this if you have >> virtual images that you can copy without worrying about losing data, >> the packages have not been tested in systems running other things but >> it is in my best interest to make it work correctly in those cases >> too. >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get -y install geonode >> >> >> Thanks in advance for anyone who would like to help and report back >> here, this will hopefully make upgrading easier for all of us in the >> future. >> >> Ariel. >
Adam, you can create a superuser by doing: geonode createsuperuser And change the local server name in the SITEURL parameter in /etc/geonode/local_settings.py These, and other things you should do after the install are in the latest version of the docs/deploy/production document. Ariel On Sep 21, 2011 11:47 AM, "Adam Mar" <hic030@hotmail.com> wrote: > > Hi Ariel, > I installed the GeoNode successfully using the 4 lines on a freshly installed Ubuntu 11.04. there is only a small issue concerning the server name, administrator name and password. During the installation process, these three parameters are not asked (as it was the case when we use the 8 lines). So when I run geonode I'm not able to sign in as administrator. I tried the "admin" as Administrator name and also as password but it isn't accepted. > Regards and many thanks > Adam > Date: Wed, 21 Sep 2011 08:06:47 -0400 > From: ingenieroariel@gmail.com > Subject: Re: RE: [geonode] GeoNode Packages, call for testers. > To: geonode@librelist.com > > Adam, > You can use only the four lines, the ones you mentioned are what I do to build them (in fact I do more steps, since I also build the geonode release tarball). > On Sep 21, 2011 7:01 AM, "Adam Mar" <hic030@hotmail.com> wrote: >> >> Hi Ariel, >> I will test the installation this afternoon on a freshly installed Ubuntu 11.04, and I would like to ask you if we should use only the four lines or start by the others comand like: > >> >> sudo apt-get install -y git-core debhelper devscripts >> git clone git://github.com/GFDRR/geonode-deb.git >> cd geonode-deb >> wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz > >> tar zxvf GeoNode-1.1-beta2.tar.gz >> debuild --no-lintian -us -uc >> sudo dpkg -i ../geonode_1.1.beta+2_all.deb >> sudo apt-get install -f >> Many thanks >> Adam >> >> >>> Date: Tue, 20 Sep 2011 13:42:16 -0400 > >>> From: ingenieroariel@gmail.com >>> Subject: [geonode] GeoNode Packages, call for testers. >>> To: geonode@librelist.com > >>> >>> Hello people, >>> >>> After playing a lot with the deb packaging system the GeoNode >>> installers for Ubuntu seem to be in pretty good shape (thanks everyone >>> for the much needed feedback). > >>> >>> I need help for 3 different types of situations: >>> >>> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) >>> This is the case that I have been testing and troubleshooting: > >>> >>> sudo apt-get install python-software-properties >>> sudo add-apt-repository ppa:ingenieroariel/ppa >>> sudo apt-get update >>> sudo apt-get -y install geonode >>> > >>> #2 People who have successfully installed it via the APT repo or my >>> Launchpad PPA and would like to perform an update, I am especially >>> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that > >>> would help me understand what kind of issues may be with the update to >>> 1.1+final), note that the instructions may end up upgrading other >>> packages apart from geonode, beware. >>> > >>> sudo apt-get install python-software-properties >>> sudo add-apt-repository ppa:ingenieroariel/ppa >>> sudo apt-get update >>> sudo apt-get upgrade >>> >>> #3 (This is for the bravest kind) People who have a system with other > >>> packages / servers installed (Like Postgres or Tomcat) and would like >>> to try the GeoNode packages there. Please only do this if you have >>> virtual images that you can copy without worrying about losing data, > >>> the packages have not been tested in systems running other things but >>> it is in my best interest to make it work correctly in those cases >>> too. >>> >>> sudo apt-get install python-software-properties > >>> sudo add-apt-repository ppa:ingenieroariel/ppa >>> sudo apt-get update >>> sudo apt-get -y install geonode >>> >>> >>> Thanks in advance for anyone who would like to help and report back > >>> here, this will hopefully make upgrading easier for all of us in the >>> future. >>> >>> Ariel. >> >
http://www.edmondweblog.com/index.php/2011/01/01/come-aggiungere-ppa-in-debian/Hi Ariel, I succesfully installed from ppa:ingenieroariel/ppa on a fresh Debian 6. Everything has been perfect and everything is working fine. On the Debian si missing the add-apt-repository command, I have created it before by using the following script: http://www.edmondweblog.com/index.php/2011/01/01/come-aggiungere-ppa-in-debian/ Great job Ariel! (I tried also on a non fresh VM where I already had django and tomcat but something goes wrong with those packages.) Cheers 2011/9/21 Ariel Nunez <ingenieroariel@gmail.com> > Adam, you can create a superuser by doing: > > geonode createsuperuser > > And change the local server name in the SITEURL parameter in > /etc/geonode/local_settings.py > > These, and other things you should do after the install are in the latest > version of the docs/deploy/production document. > > Ariel > On Sep 21, 2011 11:47 AM, "Adam Mar" <hic030@hotmail.com> wrote: > > > > Hi Ariel, > > I installed the GeoNode successfully using the 4 lines on a freshly > installed Ubuntu 11.04. there is only a small issue concerning the server > name, administrator name and password. During the installation process, > these three parameters are not asked (as it was the case when we use the 8 > lines). So when I run geonode I'm not able to sign in as administrator. I > tried the "admin" as Administrator name and also as password but it isn't > accepted. > > Regards and many thanks > > Adam > > Date: Wed, 21 Sep 2011 08:06:47 -0400 > > From: ingenieroariel@gmail.com > > Subject: Re: RE: [geonode] GeoNode Packages, call for testers. > > To: geonode@librelist.com > > > > Adam, > > You can use only the four lines, the ones you mentioned are what I do to > build them (in fact I do more steps, since I also build the geonode release > tarball). > > On Sep 21, 2011 7:01 AM, "Adam Mar" <hic030@hotmail.com> wrote: > >> > >> Hi Ariel, > >> I will test the installation this afternoon on a freshly installed > Ubuntu 11.04, and I would like to ask you if we should use only the four > lines or start by the others comand like: > > > >> > >> sudo apt-get install -y git-core debhelper devscripts > >> git clone git://github.com/GFDRR/geonode-deb.git > >> cd geonode-deb > >> wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz > > > >> tar zxvf GeoNode-1.1-beta2.tar.gz > >> debuild --no-lintian -us -uc > >> sudo dpkg -i ../geonode_1.1.beta+2_all.deb > >> sudo apt-get install -f > >> Many thanks > >> Adam > >> > >> > >>> Date: Tue, 20 Sep 2011 13:42:16 -0400 > > > >>> From: ingenieroariel@gmail.com > >>> Subject: [geonode] GeoNode Packages, call for testers. > >>> To: geonode@librelist.com > > > >>> > >>> Hello people, > >>> > >>> After playing a lot with the deb packaging system the GeoNode > >>> installers for Ubuntu seem to be in pretty good shape (thanks everyone > >>> for the much needed feedback). > > > >>> > >>> I need help for 3 different types of situations: > >>> > >>> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) > >>> This is the case that I have been testing and troubleshooting: > > > >>> > >>> sudo apt-get install python-software-properties > >>> sudo add-apt-repository ppa:ingenieroariel/ppa > >>> sudo apt-get update > >>> sudo apt-get -y install geonode > >>> > > > >>> #2 People who have successfully installed it via the APT repo or my > >>> Launchpad PPA and would like to perform an update, I am especially > >>> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that > > > >>> would help me understand what kind of issues may be with the update to > >>> 1.1+final), note that the instructions may end up upgrading other > >>> packages apart from geonode, beware. > >>> > > > >>> sudo apt-get install python-software-properties > >>> sudo add-apt-repository ppa:ingenieroariel/ppa > >>> sudo apt-get update > >>> sudo apt-get upgrade > >>> > >>> #3 (This is for the bravest kind) People who have a system with other > > > >>> packages / servers installed (Like Postgres or Tomcat) and would like > >>> to try the GeoNode packages there. Please only do this if you have > >>> virtual images that you can copy without worrying about losing data, > > > >>> the packages have not been tested in systems running other things but > >>> it is in my best interest to make it work correctly in those cases > >>> too. > >>> > >>> sudo apt-get install python-software-properties > > > >>> sudo add-apt-repository ppa:ingenieroariel/ppa > >>> sudo apt-get update > >>> sudo apt-get -y install geonode > >>> > >>> > >>> Thanks in advance for anyone who would like to help and report back > > > >>> here, this will hopefully make upgrading easier for all of us in the > >>> future. > >>> > >>> Ariel. > >> > > > -- Simone Dalmasso, Ph.D. Geomatics Environmental Engineer ITHACA Information Technology for Humanitarian Assistance, Cooperation and Action www.ithacaweb.org Via Pier Carlo Boggio 61 - 10138 Torino Tel: +39.011.1975.1860
Wow Simone, That is excellent news, I did not know if all the package names would be the same, as well as the postgis location. Happy to see that it works in Debian. Thanks for testing it and reporting here. Ariel On Wed, Sep 21, 2011 at 4:21 PM, Simone Dalmasso <simone.dalmasso@ithaca.polito.it> wrote: > http://www.edmondweblog.com/index.php/2011/01/01/come-aggiungere-ppa-in-debian/Hi > Ariel, > I succesfully installed from ppa:ingenieroariel/ppa on a fresh Debian 6. > Everything has been perfect and everything is working fine. > On the Debian si missing the add-apt-repository command, I have created it > before by using the following script: > http://www.edmondweblog.com/index.php/2011/01/01/come-aggiungere-ppa-in-debian/ > > Great job Ariel! > > (I tried also on a non fresh VM where I already had django and tomcat but > something goes wrong with those packages.) > Cheers > 2011/9/21 Ariel Nunez <ingenieroariel@gmail.com> >> >> Adam, you can create a superuser by doing: >> >> geonode createsuperuser >> >> And change the local server name in the SITEURL parameter in >> /etc/geonode/local_settings.py >> >> These, and other things you should do after the install are in the latest >> version of the docs/deploy/production document. >> >> Ariel >> >> On Sep 21, 2011 11:47 AM, "Adam Mar" <hic030@hotmail.com> wrote: >> > >> > Hi Ariel, >> > I installed the GeoNode successfully using the 4 lines on a freshly >> > installed Ubuntu 11.04. there is only a small issue concerning the server >> > name, administrator name and password. During the installation process, >> > these three parameters are not asked (as it was the case when we use the 8 >> > lines). So when I run geonode I'm not able to sign in as administrator. I >> > tried the "admin" as Administrator name and also as password but it isn't >> > accepted. >> > Regards and many thanks >> > Adam >> > Date: Wed, 21 Sep 2011 08:06:47 -0400 >> > From: ingenieroariel@gmail.com >> > Subject: Re: RE: [geonode] GeoNode Packages, call for testers. >> > To: geonode@librelist.com >> > >> > Adam, >> > You can use only the four lines, the ones you mentioned are what I do to >> > build them (in fact I do more steps, since I also build the geonode release >> > tarball). >> > On Sep 21, 2011 7:01 AM, "Adam Mar" <hic030@hotmail.com> wrote: >> >> >> >> Hi Ariel, >> >> I will test the installation this afternoon on a freshly installed >> >> Ubuntu 11.04, and I would like to ask you if we should use only the four >> >> lines or start by the others comand like: >> > >> >> >> >> sudo apt-get install -y git-core debhelper devscripts >> >> git clone git://github.com/GFDRR/geonode-deb.git >> >> cd geonode-deb >> >> wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz >> > >> >> tar zxvf GeoNode-1.1-beta2.tar.gz >> >> debuild --no-lintian -us -uc >> >> sudo dpkg -i ../geonode_1.1.beta+2_all.deb >> >> sudo apt-get install -f >> >> Many thanks >> >> Adam >> >> >> >> >> >>> Date: Tue, 20 Sep 2011 13:42:16 -0400 >> > >> >>> From: ingenieroariel@gmail.com >> >>> Subject: [geonode] GeoNode Packages, call for testers. >> >>> To: geonode@librelist.com >> > >> >>> >> >>> Hello people, >> >>> >> >>> After playing a lot with the deb packaging system the GeoNode >> >>> installers for Ubuntu seem to be in pretty good shape (thanks everyone >> >>> for the much needed feedback). >> > >> >>> >> >>> I need help for 3 different types of situations: >> >>> >> >>> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) >> >>> This is the case that I have been testing and troubleshooting: >> > >> >>> >> >>> sudo apt-get install python-software-properties >> >>> sudo add-apt-repository ppa:ingenieroariel/ppa >> >>> sudo apt-get update >> >>> sudo apt-get -y install geonode >> >>> >> > >> >>> #2 People who have successfully installed it via the APT repo or my >> >>> Launchpad PPA and would like to perform an update, I am especially >> >>> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that >> > >> >>> would help me understand what kind of issues may be with the update to >> >>> 1.1+final), note that the instructions may end up upgrading other >> >>> packages apart from geonode, beware. >> >>> >> > >> >>> sudo apt-get install python-software-properties >> >>> sudo add-apt-repository ppa:ingenieroariel/ppa >> >>> sudo apt-get update >> >>> sudo apt-get upgrade >> >>> >> >>> #3 (This is for the bravest kind) People who have a system with other >> > >> >>> packages / servers installed (Like Postgres or Tomcat) and would like >> >>> to try the GeoNode packages there. Please only do this if you have >> >>> virtual images that you can copy without worrying about losing data, >> > >> >>> the packages have not been tested in systems running other things but >> >>> it is in my best interest to make it work correctly in those cases >> >>> too. >> >>> >> >>> sudo apt-get install python-software-properties >> > >> >>> sudo add-apt-repository ppa:ingenieroariel/ppa >> >>> sudo apt-get update >> >>> sudo apt-get -y install geonode >> >>> >> >>> >> >>> Thanks in advance for anyone who would like to help and report back >> > >> >>> here, this will hopefully make upgrading easier for all of us in the >> >>> future. >> >>> >> >>> Ariel. >> >> >> > > > > > -- > Simone Dalmasso, > Ph.D. Geomatics > Environmental Engineer > ITHACA > Information Technology for Humanitarian Assistance, Cooperation and Action > www.ithacaweb.org > Via Pier Carlo Boggio 61 - 10138 Torino > Tel: +39.011.1975.1860 >
Hi Ariel, I will test the installation this afternoon on a freshly installed Ubuntu 11.04, and I would like to ask you if we should use only the four lines or start by the others comand like: sudo apt-get install -y git-core debhelper devscripts git clone git://github.com/GFDRR/geonode-deb.git cd geonode-deb wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz tar zxvf GeoNode-1.1-beta2.tar.gz debuild --no-lintian -us -uc sudo dpkg -i ../geonode_1.1.beta+2_all.deb sudo apt-get install -f Many thanks Adam > Date: Tue, 20 Sep 2011 13:42:16 -0400 > From: ingenieroariel@gmail.com > Subject: [geonode] GeoNode Packages, call for testers. > To: geonode@librelist.com > > Hello people, > > After playing a lot with the deb packaging system the GeoNode > installers for Ubuntu seem to be in pretty good shape (thanks everyone > for the much needed feedback). > > I need help for 3 different types of situations: > > #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) > This is the case that I have been testing and troubleshooting: > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get -y install geonode > > #2 People who have successfully installed it via the APT repo or my > Launchpad PPA and would like to perform an update, I am especially > interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that > would help me understand what kind of issues may be with the update to > 1.1+final), note that the instructions may end up upgrading other > packages apart from geonode, beware. > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get upgrade > > #3 (This is for the bravest kind) People who have a system with other > packages / servers installed (Like Postgres or Tomcat) and would like > to try the GeoNode packages there. Please only do this if you have > virtual images that you can copy without worrying about losing data, > the packages have not been tested in systems running other things but > it is in my best interest to make it work correctly in those cases > too. > > sudo apt-get install python-software-properties > sudo add-apt-repository ppa:ingenieroariel/ppa > sudo apt-get update > sudo apt-get -y install geonode > > > Thanks in advance for anyone who would like to help and report back > here, this will hopefully make upgrading easier for all of us in the > future. > > Ariel.
Adam, You can use only the four lines, the ones you mentioned are what I do to build them (in fact I do more steps, since I also build the geonode release tarball). On Sep 21, 2011 7:01 AM, "Adam Mar" <hic030@hotmail.com> wrote: > > Hi Ariel, > I will test the installation this afternoon on a freshly installed Ubuntu 11.04, and I would like to ask you if we should use only the four lines or start by the others comand like: > > sudo apt-get install -y git-core debhelper devscripts > git clone git://github.com/GFDRR/geonode-deb.git > cd geonode-deb > wget http://dev.geonode.org/release/GeoNode-1.1-beta2.tar.gz > tar zxvf GeoNode-1.1-beta2.tar.gz > debuild --no-lintian -us -uc > sudo dpkg -i ../geonode_1.1.beta+2_all.deb > sudo apt-get install -f > Many thanks > Adam > > >> Date: Tue, 20 Sep 2011 13:42:16 -0400 >> From: ingenieroariel@gmail.com >> Subject: [geonode] GeoNode Packages, call for testers. >> To: geonode@librelist.com >> >> Hello people, >> >> After playing a lot with the deb packaging system the GeoNode >> installers for Ubuntu seem to be in pretty good shape (thanks everyone >> for the much needed feedback). >> >> I need help for 3 different types of situations: >> >> #1 Freshly installed Ubuntu (10.04, 10.10, 11.04 or a 11.10 alpha) >> This is the case that I have been testing and troubleshooting: >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get -y install geonode >> >> #2 People who have successfully installed it via the APT repo or my >> Launchpad PPA and would like to perform an update, I am especially >> interested in the update from 1.1+RC1 to 1.1+RC1-ariel6 (because that >> would help me understand what kind of issues may be with the update to >> 1.1+final), note that the instructions may end up upgrading other >> packages apart from geonode, beware. >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get upgrade >> >> #3 (This is for the bravest kind) People who have a system with other >> packages / servers installed (Like Postgres or Tomcat) and would like >> to try the GeoNode packages there. Please only do this if you have >> virtual images that you can copy without worrying about losing data, >> the packages have not been tested in systems running other things but >> it is in my best interest to make it work correctly in those cases >> too. >> >> sudo apt-get install python-software-properties >> sudo add-apt-repository ppa:ingenieroariel/ppa >> sudo apt-get update >> sudo apt-get -y install geonode >> >> >> Thanks in advance for anyone who would like to help and report back >> here, this will hopefully make upgrading easier for all of us in the >> future. >> >> Ariel. >