librelist archives

Re: [geonode] Fwd: 4th try to deploy geonode...unsuccessfull

From:

Jeffrey Johnson

Date:

2011-07-28 @ 18:42

Hi Thomas,

I ran into this same issue today when installing on an ubuntu 11.04
installation. While Im not exactly sure what is going on, I was able
to get past this problem by issuing the following 2 easy_install
commands and then re-running the bootstrap.py script.

easy_install PasteScript
easy_install PasteDeploy

There is clearly some issue with those 2 packages in the geonode
bundle, and we will investigate ASAP.

Let me know if you have any luck trying this out?

Jeff

On Wed, Jul 20, 2011 at 11:53 AM, Thomas Baumann <expedio@gmail.com> wrote:
> Hello Jeff, Hello David,
>
> thanks for your answers.
>
> I tried to do the step 4 of the chapter  "Install GeoNode Django Site"
> again, but still the same error occurs.
>
> After this I also tried to have a look for a pip-bundle. What I could find
> in the extracted tar-archive is only a file called
> "geonode-webapp.pybundle". In the docs (
> http://docs.geonode.org/1.0.1/deploy/ubuntu.html ) I could not find anything
> written about a pip-file.
>
> When I searched the term "pip" I only found this:
> http://docs.geonode.org/1.0.1/deployment.html?highlight=pip
> I followed the steps so setup the virtual environment
> (
>
> Install virtualenv if you do not already have it available. It can easily be
> installed via easy_install or pip:
>
> $ easy_install virtualenv
> $ pip install virualenv
>
> Prepare a sandbox for GeoNode using virtualenv:
>
> $ virtualenv geonode
> $ cd geonode
> $ source bin/activate
>
> Install the geonode python modules from the Pip bundle:
>
> $ pip install geonode-webapp.pybundle
>
> But I cannot see any differences.
>
> On the same page was written "Extract all the JavaScript and CSS files from
> the GeoNode release archive (geonode-client.zip) into the document root."
> But in my downloaded tar-archive there is no file named
> geonode-client.zip...
> I am a bit confused now. Should I stick to the site
> "http://docs.geonode.org/1.0.1/deploy/ubuntu.html" or to both?
> Do you have any further ideas what to do?
>
> best wishes,
>
> Thomas
>
> 2011/7/20 David Winslow <dwinslow@opengeo.org>
>>
>> PyPI should not be involved during installation from the GeoNode tar
>> archive.  The archive includes the source for all the third-party Python
>> modules in a "pip bundle."
>>
>> --
>> David Winslow
>> OpenGeo - http://opengeo.org/
>>
>> On Wed, Jul 20, 2011 at 1:04 PM, Jeffrey Johnson <jjohnson@opengeo.org>
>> wrote:
>>>
>>> Thomas,
>>>
>>> The first geoserver errors are expected. GeoServer uses GeoNode to
>>> handle its authentication and authorization, so until GeoNode is up
>>> and running, this error is expected as GeoServer can in fact _not_
>>> connect to GeoNode ... yet. There is a note in the documentation, but
>>> since so very many people come to the list with this same issue, I
>>> think we somehow need to make it much more clear.
>>>
>>> The error in the pip command is a little more insidious, but it looks
>>> like it may be caused by one of the pypi repos not answering. Can you
>>> try it again and see if its now working?
>>>
>>> Jeff
>>>
>>> On Wed, Jul 20, 2011 at 9:39 AM, Thomas Baumann <expedio@gmail.com>
>>> wrote:
>>> > Hello there,
>>> >
>>> > I have seen the presentation of Geonode at the AGIT-Conference and
>>> > wanted
>>> > now to install it on my own server.
>>> >
>>> > As I encountered several problems for which I could not find answers on
>>> > the
>>> > internet, I hope to find someone here who could give me some hints for
>>> > my
>>> > problems during the install/deploying of geonode.
>>> >
>>> > I downloaded the newest version of Geonoede GeoNode-1.1-beta2.tar.gz
>>> > and
>>> > used the doc http://docs.geonode.org/1.0.1/deploy/ubuntu.html as a
>>> > guideline.
>>> > In the meantime i tried it on 4 different computers/servers (all
>>> > running
>>> > with ubuntu 10.04) but without success so far.
>>> >
>>> > After copying the geoserver to tomcat-webapps (sudo cp
>>> > geoserver-geonode-dev.war /var/lib/tomcat6/webapps/)
>>> > I cannot reach http://localhost:8080/geoserver-geonode-dev/ even after
>>> > doing
>>> > all the changes decribed in the chapter "deploying Geoserver".
>>> > I attached the error messages I got from tomcat.
>>> >
>>> > After doing the changes decribed in the chapter "Install GeoNode Django
>>> > Site"
>>> > I got an error message when I tried to do the "python
>>> > bootstrap.py"-Part
>>> > (see attached pip.log):
>>> >
>>> > I am also not able to reach
>>> > http://localhost/media/static/gn/theme/app/img/header-bg.png
>>> >
>>> > does anyone perhaps have some tipps for me. You got me at a loss...
>>> >
>>> > best wishes,
>>> >
>>> > Thomas
>>> >
>>> >
>>> >
>>> >
>>> >
>>
>
>