librelist archives

Re: [geonode] Error connecting to GeoNode authentication server: Readtimed out

From:

Ariel Nunez

Date:

2011-01-14 @ 13:34

Deavi, in about an hour most of the GeoNode devs will log in the #geonode
channel in IRC. I suggest you log in there and bring up the issue.

If the GEONODE_BASE_URL setting is correct then the next place to look at is
the WSGI configuration. Specifically the `WSGIPassAuthorization On` param.

After that, can you answer this set of questions:
- What url did you set for GeoServer in local_settings.py?

- Have you tried to run the same configuration but using port 80? (Running
it in https / 443 should not be a problem but it is better to be safe than
sorry)

Best,
Ariel.

On Thu, Jan 13, 2011 at 11:12 PM, Deavi Purnomo <
Deavi.Purnomo@landgate.wa.gov.au> wrote:

>  HI Ariel,
>
>
>
> Thank you for your suggestion. Yes I did. This is the setting:
>
>
>
>     <context-param>
>
>         <param-name>GEONODE_BASE_URL</param-name>
>
>         <param-value>http://beta-u.landgate.wa.gov.au:443/</param-value>
>
>     </context-param>
>
>
>
> Regards, Deavi
>
> -----Original Message-----
> *From:* geonode@librelist.com [mailto:geonode@librelist.com] *On Behalf Of
> *Ariel Nunez
> *Sent:* Friday, 14 January 2011 10:08 AM
> *To:* geonode@librelist.com
> *Subject:* Re: [geonode] Error connecting to GeoNode authentication
> server: Readtimed out
>
>
>
> Have you configured the GEONODE_BASE_URL setting in Geoserver? If you have,
> can you check it is looking for the right port?
>
> Sent from my iPad
>
>
> On Jan 13, 2011, at 18:57, Deavi Purnomo <Deavi.Purnomo@landgate.wa.gov.au>
> wrote:
>
>  Hi Geonode,
>
>
>
> I have been trying to install Geonode and managed to install most of the
> component (I think). This is the geonode website:
> http://beta-u.landgate.wa.gov.au:443/. It seems to be working apart from a
> number of things. One of them is I keep getting an issue when I go into the
> MAPS. The error stated "the server returned an error". I investigated the
> issue and it seems that the issue is that when the maps was open a request
> was sent to Geoserver by geonode via proxy:
> 
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
> 
http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities<<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
> 
http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
> . When I try to run the request, I get back the following error message:
> "Error connecting to GeoNode authentication server: Read timed out".
>
>
>
> I tried to see what cause this by looking into the code and tried a number
> of things to resolve the problem myself but none of them works. Could
> someone please help me?
>
>
>
> Thank you.
>
>
>
>
>
>
>
> Regards, Dv
>
>
>
>
> -------------------------------------------------------------------
> Deavi Purnomo
> Manager – Geospatial Consultancy Services
> Commercial Services and Consultancy
> Office:    +61 (8) 9273 0786
> Mobile:   +61    421 908 908
> email:  <deavi.purnomo@landgate.wa.gov.au>deavi.purnomo@landgate.wa.gov.au
> website:   
http://www.landgate.wa.gov.au<http://www.landgate.wa.gov.au/corporate.nsf/82289d1c922cd5eec82573620022343a/f72483272acf8441c825749d0026c3e7?OpenDocument&Highlight=2,international>
> -------------------------------------------------------------------
>
>
>
> This e-mail and any files transmitted with it are intended only for the use
> of the addressee(s). It may contain information that is confidential and
> privileged, in which case neither is intended to be waived or lost by
> mistaken delivery to you. If you are not an intended recipient, any use,
> interference with, disclosure, distribution or copying of this material is
> unauthorised and prohibited. If you receive this e-mail in error, please
> notify the sender by return e-mail and delete the message and any
> attachments from your system. Unless specifically indicated, this e-mail
> does not constitute formal advice or commitment by the sender or the Western
> Australian Land Information Authority (Landgate). Information in this
> message not relating to the official business of Landgate shall be
> understood as neither given nor endorsed by it. It is your responsibility to
> check any attachments for viruses and defects before opening or sending them
> on. Landgate’s liability is limited to re-supplying affected attachments.
>
>

Hi Ariel,
 
I am sorry I did not get the email in time to get into IRC.When is the 
usual time for the #geonode channel in IRC open?
 
I will check the parameter on Monday. 
 
Have a great weekend.
 
Regards, Dv

________________________________

From: geonode@librelist.com on behalf of Ariel Nunez
Sent: Fri 14/01/2011 9:34 PM
To: geonode@librelist.com
Subject: Re: [geonode] Error connecting to GeoNode authentication 
server:Readtimed out


Deavi, in about an hour most of the GeoNode devs will log in the #geonode 
channel in IRC. I suggest you log in there and bring up the issue. 

If the GEONODE_BASE_URL setting is correct then the next place to look at 
is the WSGI configuration. Specifically the `WSGIPassAuthorization On` 
param.


After that, can you answer this set of questions:
- What url did you set for GeoServer in local_settings.py?


- Have you tried to run the same configuration but using port 80? (Running
it in https / 443 should not be a problem but it is better to be safe than
sorry)


Best, 
Ariel.


On Thu, Jan 13, 2011 at 11:12 PM, Deavi Purnomo 
<Deavi.Purnomo@landgate.wa.gov.au> wrote:


	HI Ariel,

	 

	Thank you for your suggestion. Yes I did. This is the setting:

	 

	    <context-param>

	        <param-name>GEONODE_BASE_URL</param-name>

	        <param-value>http://beta-u.landgate.wa.gov.au:443/</param-value>

	    </context-param>

	 

	Regards, Deavi

	-----Original Message-----
	From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of 
Ariel Nunez
	Sent: Friday, 14 January 2011 10:08 AM
	To: geonode@librelist.com
	Subject: Re: [geonode] Error connecting to GeoNode authentication server:
Readtimed out

	 

	Have you configured the GEONODE_BASE_URL setting in Geoserver? If you 
have, can you check it is looking for the right port?
	
	Sent from my iPad

	
	On Jan 13, 2011, at 18:57, Deavi Purnomo 
<Deavi.Purnomo@landgate.wa.gov.au> wrote:

		Hi Geonode,

		 

		I have been trying to install Geonode and managed to install most of the
component (I think). This is the geonode 
website:http://beta-u.landgate.wa.gov.au:443/. It seems to be working 
apart from a number of things. One of them is I keep getting an issue when
I go into the MAPS. The error stated "the server returned an error". I 
investigated the issue and it seems that the issue is that when the maps 
was open a request was sent to Geoserver by geonode via proxy: 
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>

http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities
< 
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>

http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
. When I try to run the request, I get back the following error message: 
"Error connecting to GeoNode authentication server: Read timed out". 

		 

		I tried to see what cause this by looking into the code and tried a 
number of things to resolve the problem myself but none of them works. 
Could someone please help me?

		 

		Thank you. 

		 

		 

		 

		Regards, Dv

		 

		
		-------------------------------------------------------------------
		Deavi Purnomo 
		Manager - Geospatial Consultancy Services
		Commercial Services and Consultancy
		Office:    +61 (8) 9273 0786
		Mobile:   +61    421 908 908
		email:  <mailto:deavi.purnomo@landgate.wa.gov.au> 
deavi.purnomo@landgate.wa.gov.au 
		website:   http://www.landgate.wa.gov.au 
<http://www.landgate.wa.gov.au/corporate.nsf/82289d1c922cd5eec82573620022343a/f72483272acf8441c825749d0026c3e7?OpenDocument&Highlight=2,international>

		-------------------------------------------------------------------

		 

		This e-mail and any files transmitted with it are intended only for the 
use of the addressee(s). It may contain information that is confidential 
and privileged, in which case neither is intended to be waived or lost by 
mistaken delivery to you. If you are not an intended recipient, any use, 
interference with, disclosure, distribution or copying of this material is
unauthorised and prohibited. If you receive this e-mail in error, please 
notify the sender by return e-mail and delete the message and any 
attachments from your system. Unless specifically indicated, this e-mail 
does not constitute formal advice or commitment by the sender or the 
Western Australian Land Information Authority (Landgate). Information in 
this message not relating to the official business of Landgate shall be 
understood as neither given nor endorsed by it. It is your responsibility 
to check any attachments for viruses and defects before opening or sending
them on. Landgate's liability is limited to re-supplying affected 
attachments.

HI Ariel,

 

The WSGIPassAuthorization is already on. This is what I have in the
geonode.wsgi: 

 

ProxyPass         /geoserver-geonode-dev/
http://localhost:8080/geoserver-geonode-dev/

ProxyPassReverse  /geoserver-geonode-dev/
http://localhost:8080/geoserver-geonode-dev/

 

ProxyPass         /geonetwork/ http://localhost:8080/geonetwork/

ProxyPassReverse  /geonetwork/ http://localhost:8080/geonetwork/

 

WSGIScriptAlias / /apps/geonode/geonode.wsgi

WSGIProcessGroup geonode

WSGIDaemonProcess geonode
python-path=/usr/local/src/geonode/GeoNode-1.0-RC2/lib/python2.6/site-pa
ckages

WSGIPassAuthorization On

 

 

And this is the Geoserver URL in the local_setting.py:

 

            GEOSERVER_BASE_URL =
http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/

 

I have also tried to change the port to port 80 but it caused conflict
(apache is using port 80 to redirect requests). I have applied for an
additional port 8001 to see this will work. 

 

Regards, Deavi

-----Original Message-----
From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of
Ariel Nunez
Sent: Friday, 14 January 2011 9:35 PM
To: geonode@librelist.com
Subject: Re: [geonode] Error connecting to GeoNode authentication
server:Readtimed out

 

Deavi, in about an hour most of the GeoNode devs will log in the
#geonode channel in IRC. I suggest you log in there and bring up the
issue.

 

If the GEONODE_BASE_URL setting is correct then the next place to look
at is the WSGI configuration. Specifically the `WSGIPassAuthorization
On` param.





 

After that, can you answer this set of questions:

- What url did you set for GeoServer in local_settings.py?





 

- Have you tried to run the same configuration but using port 80?
(Running it in https / 443 should not be a problem but it is better to
be safe than sorry)



 

 

Best,

Ariel.

 

On Thu, Jan 13, 2011 at 11:12 PM, Deavi Purnomo
<Deavi.Purnomo@landgate.wa.gov.au> wrote:

HI Ariel,

 

Thank you for your suggestion. Yes I did. This is the setting:

 

    <context-param>

        <param-name>GEONODE_BASE_URL</param-name>

        <param-value>http://beta-u.landgate.wa.gov.au:443/</param-value>

    </context-param>

 

Regards, Deavi

-----Original Message-----
From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of
Ariel Nunez
Sent: Friday, 14 January 2011 10:08 AM
To: geonode@librelist.com
Subject: Re: [geonode] Error connecting to GeoNode authentication
server: Readtimed out

 

Have you configured the GEONODE_BASE_URL setting in Geoserver? If you
have, can you check it is looking for the right port?

Sent from my iPad


On Jan 13, 2011, at 18:57, Deavi Purnomo
<Deavi.Purnomo@landgate.wa.gov.au> wrote:

	Hi Geonode,

	 

	I have been trying to install Geonode and managed to install
most of the component (I think). This is the geonode
website:http://beta-u.landgate.wa.gov.au:443/. It seems to be working
apart from a number of things. One of them is I keep getting an issue
when I go into the MAPS. The error stated "the server returned an
error". I investigated the issue and it seems that the issue is that
when the maps was open a request was sent to Geoserver by geonode via
proxy:
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.
wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.w
a.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities <
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.
wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.w
a.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
. When I try to run the request, I get back the following error message:
"Error connecting to GeoNode authentication server: Read timed out". 

	 

	I tried to see what cause this by looking into the code and
tried a number of things to resolve the problem myself but none of them
works. Could someone please help me?

	 

	Thank you. 

	 

	 

	 

	Regards, Dv

	 

	
	
-------------------------------------------------------------------
	Deavi Purnomo 
	Manager - Geospatial Consultancy Services
	Commercial Services and Consultancy
	Office:    +61 (8) 9273 0786
	Mobile:   +61    421 908 908
	email:  <mailto:deavi.purnomo@landgate.wa.gov.au>
deavi.purnomo@landgate.wa.gov.au 
	website:   http://www.landgate.wa.gov.au
<http://www.landgate.wa.gov.au/corporate.nsf/82289d1c922cd5eec8257362002
2343a/f72483272acf8441c825749d0026c3e7?OpenDocument&Highlight=2,internat
ional> 
	
-------------------------------------------------------------------

	 

	This e-mail and any files transmitted with it are intended only
for the use of the addressee(s). It may contain information that is
confidential and privileged, in which case neither is intended to be
waived or lost by mistaken delivery to you. If you are not an intended
recipient, any use, interference with, disclosure, distribution or
copying of this material is unauthorised and prohibited. If you receive
this e-mail in error, please notify the sender by return e-mail and
delete the message and any attachments from your system. Unless
specifically indicated, this e-mail does not constitute formal advice or
commitment by the sender or the Western Australian Land Information
Authority (Landgate). Information in this message not relating to the
official business of Landgate shall be understood as neither given nor
endorsed by it. It is your responsibility to check any attachments for
viruses and defects before opening or sending them on. Landgate's
liability is limited to re-supplying affected attachments.

 

Is your web server really running non-SSL'ed HTTP on port 443? That's a
highly unusual configuration in my experience.  If you are really intending
to use https for these internal requests, you should specify it in the URL:

        
<param-value>http*s*://beta-u.landgate.wa.gov.au:443/<http://beta-u.landgate.wa.gov.au:443/>
</param-value>

--
David Winslow
OpenGeo - http://opengeo.org/

On Fri, Jan 14, 2011 at 8:34 AM, Ariel Nunez <ingenieroariel@gmail.com>wrote:

> Deavi, in about an hour most of the GeoNode devs will log in the #geonode
> channel in IRC. I suggest you log in there and bring up the issue.
>
> If the GEONODE_BASE_URL setting is correct then the next place to look at
> is the WSGI configuration. Specifically the `WSGIPassAuthorization On`
> param.
>
> After that, can you answer this set of questions:
> - What url did you set for GeoServer in local_settings.py?
>
> - Have you tried to run the same configuration but using port 80? (Running
> it in https / 443 should not be a problem but it is better to be safe than
> sorry)
>
> Best,
> Ariel.
>
>
> On Thu, Jan 13, 2011 at 11:12 PM, Deavi Purnomo <
> Deavi.Purnomo@landgate.wa.gov.au> wrote:
>
>>  HI Ariel,
>>
>>
>>
>> Thank you for your suggestion. Yes I did. This is the setting:
>>
>>
>>
>>     <context-param>
>>
>>         <param-name>GEONODE_BASE_URL</param-name>
>>
>>         <param-value>http://beta-u.landgate.wa.gov.au:443/</param-value>
>>
>>     </context-param>
>>
>>
>>
>> Regards, Deavi
>>
>> -----Original Message-----
>> *From:* geonode@librelist.com [mailto:geonode@librelist.com] *On Behalf
>> Of *Ariel Nunez
>> *Sent:* Friday, 14 January 2011 10:08 AM
>> *To:* geonode@librelist.com
>> *Subject:* Re: [geonode] Error connecting to GeoNode authentication
>> server: Readtimed out
>>
>>
>>
>> Have you configured the GEONODE_BASE_URL setting in Geoserver? If you
>> have, can you check it is looking for the right port?
>>
>> Sent from my iPad
>>
>>
>> On Jan 13, 2011, at 18:57, Deavi Purnomo <
>> Deavi.Purnomo@landgate.wa.gov.au> wrote:
>>
>>  Hi Geonode,
>>
>>
>>
>> I have been trying to install Geonode and managed to install most of the
>> component (I think). This is the geonode website:
>> http://beta-u.landgate.wa.gov.au:443/. It seems to be working apart from
>> a number of things. One of them is I keep getting an issue when I go into
>> the MAPS. The error stated "the server returned an error". I investigated
>> the issue and it seems that the issue is that when the maps was open a
>> request was sent to Geoserver by geonode via proxy:
>> 
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
>> 
http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities<<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
>> 
http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
>> . When I try to run the request, I get back the following error message:
>> "Error connecting to GeoNode authentication server: Read timed out".
>>
>>
>>
>> I tried to see what cause this by looking into the code and tried a number
>> of things to resolve the problem myself but none of them works. Could
>> someone please help me?
>>
>>
>>
>> Thank you.
>>
>>
>>
>>
>>
>>
>>
>> Regards, Dv
>>
>>
>>
>>
>> -------------------------------------------------------------------
>> Deavi Purnomo
>> Manager – Geospatial Consultancy Services
>> Commercial Services and Consultancy
>> Office:    +61 (8) 9273 0786
>> Mobile:   +61    421 908 908
>> email:  <deavi.purnomo@landgate.wa.gov.au>
>> deavi.purnomo@landgate.wa.gov.au
>> website:   
http://www.landgate.wa.gov.au<http://www.landgate.wa.gov.au/corporate.nsf/82289d1c922cd5eec82573620022343a/f72483272acf8441c825749d0026c3e7?OpenDocument&Highlight=2,international>
>> -------------------------------------------------------------------
>>
>>
>>
>> This e-mail and any files transmitted with it are intended only for the
>> use of the addressee(s). It may contain information that is confidential and
>> privileged, in which case neither is intended to be waived or lost by
>> mistaken delivery to you. If you are not an intended recipient, any use,
>> interference with, disclosure, distribution or copying of this material is
>> unauthorised and prohibited. If you receive this e-mail in error, please
>> notify the sender by return e-mail and delete the message and any
>> attachments from your system. Unless specifically indicated, this e-mail
>> does not constitute formal advice or commitment by the sender or the Western
>> Australian Land Information Authority (Landgate). Information in this
>> message not relating to the official business of Landgate shall be
>> understood as neither given nor endorsed by it. It is your responsibility to
>> check any attachments for viruses and defects before opening or sending them
>> on. Landgate’s liability is limited to re-supplying affected attachments.
>>
>>
>

Hi David, 
Thank you for your suggestion. I will try it on monday. 
Just for your information, I was not trying to use https for the 
webserver. The server that I am using for this is under the control of our
sysadmin. I have only 3 ports open for this particular server (80, 8080 
and 443) and it is not easy to get another port open without causing long 
discussions. I used the 80 and 8080 so 443 is the only one that I can use 
for the time being. I will try to get another port open.
 
Regards, Dv

________________________________

From: geonode@librelist.com on behalf of David Winslow
Sent: Fri 14/01/2011 11:52 PM
To: geonode@librelist.com
Subject: Re: [geonode] Error connecting to GeoNode authentication 
server:Readtimed out


Is your web server really running non-SSL'ed HTTP on port 443? That's a 
highly unusual configuration in my experience.  If you are really 
intending to use https for these internal requests, you should specify it 
in the URL: 

        <param-value>https://beta-u.landgate.wa.gov.au:443/ 
<http://beta-u.landgate.wa.gov.au:443/> </param-value>


--
David Winslow
OpenGeo - http://opengeo.org/

On Fri, Jan 14, 2011 at 8:34 AM, Ariel Nunez <ingenieroariel@gmail.com> wrote:


	Deavi, in about an hour most of the GeoNode devs will log in the #geonode
channel in IRC. I suggest you log in there and bring up the issue. 

	If the GEONODE_BASE_URL setting is correct then the next place to look at
is the WSGI configuration. Specifically the `WSGIPassAuthorization On` 
param.
	
	
	After that, can you answer this set of questions:
	- What url did you set for GeoServer in local_settings.py?
	
	
	- Have you tried to run the same configuration but using port 80? 
(Running it in https / 443 should not be a problem but it is better to be 
safe than sorry)
	

	Best, 
	Ariel. 


	On Thu, Jan 13, 2011 at 11:12 PM, Deavi Purnomo 
<Deavi.Purnomo@landgate.wa.gov.au> wrote:
	

		HI Ariel,

		 

		Thank you for your suggestion. Yes I did. This is the setting:

		 

		    <context-param>

		        <param-name>GEONODE_BASE_URL</param-name>

		        <param-value>http://beta-u.landgate.wa.gov.au:443/</param-value>

		    </context-param>

		 

		Regards, Deavi

		-----Original Message-----
		From: geonode@librelist.com [mailto:geonode@librelist.com] On Behalf Of 
Ariel Nunez
		Sent: Friday, 14 January 2011 10:08 AM
		To: geonode@librelist.com
		Subject: Re: [geonode] Error connecting to GeoNode authentication 
server: Readtimed out

		 

		Have you configured the GEONODE_BASE_URL setting in Geoserver? If you 
have, can you check it is looking for the right port?
		
		Sent from my iPad

		
		On Jan 13, 2011, at 18:57, Deavi Purnomo 
<Deavi.Purnomo@landgate.wa.gov.au> wrote:

			Hi Geonode,

			 

			I have been trying to install Geonode and managed to install most of 
the component (I think). This is the geonode 
website:http://beta-u.landgate.wa.gov.au:443/. It seems to be working 
apart from a number of things. One of them is I keep getting an issue when
I go into the MAPS. The error stated "the server returned an error". I 
investigated the issue and it seems that the issue is that when the maps 
was open a request was sent to Geoserver by geonode via proxy: 
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>

http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities
< 
<http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>

http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities>
. When I try to run the request, I get back the following error message: 
"Error connecting to GeoNode authentication server: Read timed out". 

			 

			I tried to see what cause this by looking into the code and tried a 
number of things to resolve the problem myself but none of them works. 
Could someone please help me?

			 

			Thank you. 

			 

			 

			 

			Regards, Dv

			 

			
			-------------------------------------------------------------------
			Deavi Purnomo 
			Manager - Geospatial Consultancy Services
			Commercial Services and Consultancy
			Office:    +61 (8) 9273 0786
			Mobile:   +61    421 908 908
			email:  <mailto:deavi.purnomo@landgate.wa.gov.au> 
deavi.purnomo@landgate.wa.gov.au 
			website:   http://www.landgate.wa.gov.au 
<http://www.landgate.wa.gov.au/corporate.nsf/82289d1c922cd5eec82573620022343a/f72483272acf8441c825749d0026c3e7?OpenDocument&Highlight=2,international>

			-------------------------------------------------------------------

			 

			This e-mail and any files transmitted with it are intended only for the
use of the addressee(s). It may contain information that is confidential 
and privileged, in which case neither is intended to be waived or lost by 
mistaken delivery to you. If you are not an intended recipient, any use, 
interference with, disclosure, distribution or copying of this material is
unauthorised and prohibited. If you receive this e-mail in error, please 
notify the sender by return e-mail and delete the message and any 
attachments from your system. Unless specifically indicated, this e-mail 
does not constitute formal advice or commitment by the sender or the 
Western Australian Land Information Authority (Landgate). Information in 
this message not relating to the official business of Landgate shall be 
understood as neither given nor endorsed by it. It is your responsibility 
to check any attachments for viruses and defects before opening or sending
them on. Landgate's liability is limited to re-supplying affected 
attachments.