librelist archives

« back to archive

[OFF?] Pycharm new features - Flask and Jinja2!

[OFF?] Pycharm new features - Flask and Jinja2!

From:
Italo Maia
Date:
2011-09-15 @ 14:13
Hello fella's. I would like to invite everyone to vote for
jinja2<http://youtrack.jetbrains.net/issue/PY-1032>and
flask <http://youtrack.jetbrains.net/issue/PY-2248> support in the pycharm
IDE. Those, like me, that use pycharm with flask, would benefit deeply of
it.

-- 
"A arrogância é a arma dos fracos."

===========================
Italo Moreira Campelo Maia
Bacharel em Ciência da Computação - UECE
Desenvolvedor WEB e Desktop (Java, Python, Lua)
Coordenador do Pug-CE
-----------------------------------------------------
http://www.italomaia.com/
http://twitter.com/italomaia/
http://eusouolobomau.blogspot.com/
-----------------------------------------------------
Turtle Linux  9.10 - http://tiny.cc/blogturtle910
Turtle Linux 10.10 - http://bit.ly/cEw4ET
===========================

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Peter Manser
Date:
2011-09-15 @ 14:56
Little tip: If you want such features implemented, you should really
read/answer the comments by the developers of pycharm. See here
http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
by Dmitry Jemerov.


2011/9/15 Italo Maia <italo.maia@gmail.com>:
> Hello fella's. I would like to invite everyone to vote for jinja2 and flask
> support in the pycharm IDE. Those, like me, that use pycharm with flask,
> would benefit deeply of it.
>
> --
> "A arrogância é a arma dos fracos."
>
> ===========================
> Italo Moreira Campelo Maia
> Bacharel em Ciência da Computação - UECE
> Desenvolvedor WEB e Desktop (Java, Python, Lua)
> Coordenador do Pug-CE
> -----------------------------------------------------
> http://www.italomaia.com/
> http://twitter.com/italomaia/
> http://eusouolobomau.blogspot.com/
> -----------------------------------------------------
> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> Turtle Linux 10.10 - http://bit.ly/cEw4ET
> ===========================
>



-- 
Skype: petermanser
Web: http://petermanser.ch

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Italo Maia
Date:
2011-09-15 @ 15:55
But, there are no comments. Didn't understand.

2011/9/15 Peter Manser <mail@petermanser.ch>

> Little tip: If you want such features implemented, you should really
> read/answer the comments by the developers of pycharm. See here
> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
> by Dmitry Jemerov.
>
>
> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
> > Hello fella's. I would like to invite everyone to vote for jinja2 and
> flask
> > support in the pycharm IDE. Those, like me, that use pycharm with flask,
> > would benefit deeply of it.
> >
> > --
> > "A arrogância é a arma dos fracos."
> >
> > ===========================
> > Italo Moreira Campelo Maia
> > Bacharel em Ciência da Computação - UECE
> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
> > Coordenador do Pug-CE
> > -----------------------------------------------------
> > http://www.italomaia.com/
> > http://twitter.com/italomaia/
> > http://eusouolobomau.blogspot.com/
> > -----------------------------------------------------
> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
> > ===========================
> >
>
>
>
> --
> Skype: petermanser
> Web: http://petermanser.ch
>



-- 
"A arrogância é a arma dos fracos."

===========================
Italo Moreira Campelo Maia
Bacharel em Ciência da Computação - UECE
Desenvolvedor WEB e Desktop (Java, Python, Lua)
Coordenador do Pug-CE
-----------------------------------------------------
http://www.italomaia.com/
http://twitter.com/italomaia/
http://eusouolobomau.blogspot.com/
-----------------------------------------------------
Turtle Linux  9.10 - http://tiny.cc/blogturtle910
Turtle Linux 10.10 - http://bit.ly/cEw4ET
===========================

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Peter Manser
Date:
2011-09-15 @ 15:58
Log in and open the issue. (you need to be logged in to vote/see comments)

On Thu, Sep 15, 2011 at 5:55 PM, Italo Maia <italo.maia@gmail.com> wrote:
> But, there are no comments. Didn't understand.
>
> 2011/9/15 Peter Manser <mail@petermanser.ch>
>>
>> Little tip: If you want such features implemented, you should really
>> read/answer the comments by the developers of pycharm. See here
>> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
>> by Dmitry Jemerov.
>>
>>
>> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>> > Hello fella's. I would like to invite everyone to vote for jinja2 and
>> > flask
>> > support in the pycharm IDE. Those, like me, that use pycharm with flask,
>> > would benefit deeply of it.
>> >
>> > --
>> > "A arrogância é a arma dos fracos."
>> >
>> > ===========================
>> > Italo Moreira Campelo Maia
>> > Bacharel em Ciência da Computação - UECE
>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>> > Coordenador do Pug-CE
>> > -----------------------------------------------------
>> > http://www.italomaia.com/
>> > http://twitter.com/italomaia/
>> > http://eusouolobomau.blogspot.com/
>> > -----------------------------------------------------
>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>> > ===========================
>> >
>>
>>
>>
>> --
>> Skype: petermanser
>> Web: http://petermanser.ch
>
>
>
> --
> "A arrogância é a arma dos fracos."
>
> ===========================
> Italo Moreira Campelo Maia
> Bacharel em Ciência da Computação - UECE
> Desenvolvedor WEB e Desktop (Java, Python, Lua)
> Coordenador do Pug-CE
> -----------------------------------------------------
> http://www.italomaia.com/
> http://twitter.com/italomaia/
> http://eusouolobomau.blogspot.com/
> -----------------------------------------------------
> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> Turtle Linux 10.10 - http://bit.ly/cEw4ET
> ===========================
>



-- 
Skype: petermanser
Web: http://petermanser.ch

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Alex K
Date:
2011-09-16 @ 06:26
Anyone know PyCharm support debug for Flask runserver?
I want step-by-step watch variables and etc without insert code with print
or assert False.



On Thu, Sep 15, 2011 at 7:58 PM, Peter Manser <mail@petermanser.ch> wrote:

> Log in and open the issue. (you need to be logged in to vote/see comments)
>
> On Thu, Sep 15, 2011 at 5:55 PM, Italo Maia <italo.maia@gmail.com> wrote:
> > But, there are no comments. Didn't understand.
> >
> > 2011/9/15 Peter Manser <mail@petermanser.ch>
> >>
> >> Little tip: If you want such features implemented, you should really
> >> read/answer the comments by the developers of pycharm. See here
> >> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
> >> by Dmitry Jemerov.
> >>
> >>
> >> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
> >> > Hello fella's. I would like to invite everyone to vote for jinja2 and
> >> > flask
> >> > support in the pycharm IDE. Those, like me, that use pycharm with
> flask,
> >> > would benefit deeply of it.
> >> >
> >> > --
> >> > "A arrogância é a arma dos fracos."
> >> >
> >> > ===========================
> >> > Italo Moreira Campelo Maia
> >> > Bacharel em Ciência da Computação - UECE
> >> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
> >> > Coordenador do Pug-CE
> >> > -----------------------------------------------------
> >> > http://www.italomaia.com/
> >> > http://twitter.com/italomaia/
> >> > http://eusouolobomau.blogspot.com/
> >> > -----------------------------------------------------
> >> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> >> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
> >> > ===========================
> >> >
> >>
> >>
> >>
> >> --
> >> Skype: petermanser
> >> Web: http://petermanser.ch
> >
> >
> >
> > --
> > "A arrogância é a arma dos fracos."
> >
> > ===========================
> > Italo Moreira Campelo Maia
> > Bacharel em Ciência da Computação - UECE
> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
> > Coordenador do Pug-CE
> > -----------------------------------------------------
> > http://www.italomaia.com/
> > http://twitter.com/italomaia/
> > http://eusouolobomau.blogspot.com/
> > -----------------------------------------------------
> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
> > ===========================
> >
>
>
>
> --
> Skype: petermanser
> Web: http://petermanser.ch
>

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Eka (Esteban Feldman)
Date:
2011-09-16 @ 11:59
Alex: I run it as a normal python process, no need for special config on
PyCharm side AFAIK. Then you run it as debug, place your breakpoints and you
are done.
That's the good thing about Flask :)

E

On Fri, Sep 16, 2011 at 3:26 AM, Alex K <lestatcheb@googlemail.com> wrote:

> Anyone know PyCharm support debug for Flask runserver?
> I want step-by-step watch variables and etc without insert code with print
> or assert False.
>
>
>
>
> On Thu, Sep 15, 2011 at 7:58 PM, Peter Manser <mail@petermanser.ch> wrote:
>
>> Log in and open the issue. (you need to be logged in to vote/see comments)
>>
>> On Thu, Sep 15, 2011 at 5:55 PM, Italo Maia <italo.maia@gmail.com> wrote:
>> > But, there are no comments. Didn't understand.
>> >
>> > 2011/9/15 Peter Manser <mail@petermanser.ch>
>> >>
>> >> Little tip: If you want such features implemented, you should really
>> >> read/answer the comments by the developers of pycharm. See here
>> >> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
>> >> by Dmitry Jemerov.
>> >>
>> >>
>> >> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>> >> > Hello fella's. I would like to invite everyone to vote for jinja2 and
>> >> > flask
>> >> > support in the pycharm IDE. Those, like me, that use pycharm with
>> flask,
>> >> > would benefit deeply of it.
>> >> >
>> >> > --
>> >> > "A arrogância é a arma dos fracos."
>> >> >
>> >> > ===========================
>> >> > Italo Moreira Campelo Maia
>> >> > Bacharel em Ciência da Computação - UECE
>> >> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>> >> > Coordenador do Pug-CE
>> >> > -----------------------------------------------------
>> >> > http://www.italomaia.com/
>> >> > http://twitter.com/italomaia/
>> >> > http://eusouolobomau.blogspot.com/
>> >> > -----------------------------------------------------
>> >> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>> >> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>> >> > ===========================
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Skype: petermanser
>> >> Web: http://petermanser.ch
>> >
>> >
>> >
>> > --
>> > "A arrogância é a arma dos fracos."
>> >
>> > ===========================
>> > Italo Moreira Campelo Maia
>> > Bacharel em Ciência da Computação - UECE
>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>> > Coordenador do Pug-CE
>> > -----------------------------------------------------
>> > http://www.italomaia.com/
>> > http://twitter.com/italomaia/
>> > http://eusouolobomau.blogspot.com/
>> > -----------------------------------------------------
>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>> > ===========================
>> >
>>
>>
>>
>> --
>> Skype: petermanser
>> Web: http://petermanser.ch
>>
>
>


-- 
Chant Hare Krishna and Be Happy

Eka

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Alex K
Date:
2011-09-16 @ 12:13
I tried run debug on runserver.py with this code:
from app import app

def run_app(app, host='0.0.0.0', port=8888):
    app.run(port=port)

if __name__ == '__main__':
    run_app(app)




but PyCharm print error:

/usr/bin/python2.7 /home/code/runserver.py
Traceback (most recent call last):
  File "/home/code/runserver.py", line 1, in <module>
    from app import app
  File "/home/code/app/__init__.py", line 7, in <module>
    from flaskext.sqlalchemy import SQLAlchemy
  File "/usr/lib/python2.7/site-packages/flaskext/sqlalchemy.py", line 17,
in <module>
    import sqlalchemy
  File "/usr/lib/python2.7/site-packages/flaskext/sqlalchemy.py", line 24,
in <module>
    from sqlalchemy import orm
ImportError: cannot import name orm

but in bash python runserver.py works.

I don't know how to fix it...




On Fri, Sep 16, 2011 at 3:59 PM, Eka (Esteban Feldman) <
ekagaurangadas@gmail.com> wrote:

> Alex: I run it as a normal python process, no need for special config on
> PyCharm side AFAIK. Then you run it as debug, place your breakpoints and you
> are done.
> That's the good thing about Flask :)
>
> E
>
> On Fri, Sep 16, 2011 at 3:26 AM, Alex K <lestatcheb@googlemail.com> wrote:
>
>> Anyone know PyCharm support debug for Flask runserver?
>> I want step-by-step watch variables and etc without insert code with print
>> or assert False.
>>
>>
>>
>>
>> On Thu, Sep 15, 2011 at 7:58 PM, Peter Manser <mail@petermanser.ch>wrote:
>>
>>> Log in and open the issue. (you need to be logged in to vote/see
>>> comments)
>>>
>>> On Thu, Sep 15, 2011 at 5:55 PM, Italo Maia <italo.maia@gmail.com>
>>> wrote:
>>> > But, there are no comments. Didn't understand.
>>> >
>>> > 2011/9/15 Peter Manser <mail@petermanser.ch>
>>> >>
>>> >> Little tip: If you want such features implemented, you should really
>>> >> read/answer the comments by the developers of pycharm. See here
>>> >> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the
>>> comment
>>> >> by Dmitry Jemerov.
>>> >>
>>> >>
>>> >> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>>> >> > Hello fella's. I would like to invite everyone to vote for jinja2
>>> and
>>> >> > flask
>>> >> > support in the pycharm IDE. Those, like me, that use pycharm with
>>> flask,
>>> >> > would benefit deeply of it.
>>> >> >
>>> >> > --
>>> >> > "A arrogância é a arma dos fracos."
>>> >> >
>>> >> > ===========================
>>> >> > Italo Moreira Campelo Maia
>>> >> > Bacharel em Ciência da Computação - UECE
>>> >> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>> >> > Coordenador do Pug-CE
>>> >> > -----------------------------------------------------
>>> >> > http://www.italomaia.com/
>>> >> > http://twitter.com/italomaia/
>>> >> > http://eusouolobomau.blogspot.com/
>>> >> > -----------------------------------------------------
>>> >> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>> >> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>> >> > ===========================
>>> >> >
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Skype: petermanser
>>> >> Web: http://petermanser.ch
>>> >
>>> >
>>> >
>>> > --
>>> > "A arrogância é a arma dos fracos."
>>> >
>>> > ===========================
>>> > Italo Moreira Campelo Maia
>>> > Bacharel em Ciência da Computação - UECE
>>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>> > Coordenador do Pug-CE
>>> > -----------------------------------------------------
>>> > http://www.italomaia.com/
>>> > http://twitter.com/italomaia/
>>> > http://eusouolobomau.blogspot.com/
>>> > -----------------------------------------------------
>>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>> > ===========================
>>> >
>>>
>>>
>>>
>>> --
>>> Skype: petermanser
>>> Web: http://petermanser.ch
>>>
>>
>>
>
>
> --
> Chant Hare Krishna and Be Happy
>
> Eka
>

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Eka (Esteban Feldman)
Date:
2011-09-16 @ 12:22
Alex:

in bash are you using a special PYTHONPATH? Virtualenv? you can specify that
in PyCharm. I use virtualenv and tell PyCharm that my python interpreter is
the python bin from my virtualenv and that satisfy all the Paths


On Fri, Sep 16, 2011 at 9:13 AM, Alex K <lestatcheb@googlemail.com> wrote:

> I tried run debug on runserver.py with this code:
> from app import app
>
> def run_app(app, host='0.0.0.0', port=8888):
>     app.run(port=port)
>
> if __name__ == '__main__':
>     run_app(app)
>
>
>
>
> but PyCharm print error:
>
> /usr/bin/python2.7 /home/code/runserver.py
> Traceback (most recent call last):
>   File "/home/code/runserver.py", line 1, in <module>
>     from app import app
>   File "/home/code/app/__init__.py", line 7, in <module>
>     from flaskext.sqlalchemy import SQLAlchemy
>   File "/usr/lib/python2.7/site-packages/flaskext/sqlalchemy.py", line 17,
> in <module>
>     import sqlalchemy
>   File "/usr/lib/python2.7/site-packages/flaskext/sqlalchemy.py", line 24,
> in <module>
>     from sqlalchemy import orm
> ImportError: cannot import name orm
>
> but in bash python runserver.py works.
>
> I don't know how to fix it...
>
>
>
>
> On Fri, Sep 16, 2011 at 3:59 PM, Eka (Esteban Feldman) <
> ekagaurangadas@gmail.com> wrote:
>
>> Alex: I run it as a normal python process, no need for special config on
>> PyCharm side AFAIK. Then you run it as debug, place your breakpoints and you
>> are done.
>> That's the good thing about Flask :)
>>
>> E
>>
>> On Fri, Sep 16, 2011 at 3:26 AM, Alex K <lestatcheb@googlemail.com>wrote:
>>
>>> Anyone know PyCharm support debug for Flask runserver?
>>> I want step-by-step watch variables and etc without insert code with
>>> print or assert False.
>>>
>>>
>>>
>>>
>>> On Thu, Sep 15, 2011 at 7:58 PM, Peter Manser <mail@petermanser.ch>wrote:
>>>
>>>> Log in and open the issue. (you need to be logged in to vote/see
>>>> comments)
>>>>
>>>> On Thu, Sep 15, 2011 at 5:55 PM, Italo Maia <italo.maia@gmail.com>
>>>> wrote:
>>>> > But, there are no comments. Didn't understand.
>>>> >
>>>> > 2011/9/15 Peter Manser <mail@petermanser.ch>
>>>> >>
>>>> >> Little tip: If you want such features implemented, you should really
>>>> >> read/answer the comments by the developers of pycharm. See here
>>>> >> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the
>>>> comment
>>>> >> by Dmitry Jemerov.
>>>> >>
>>>> >>
>>>> >> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>>>> >> > Hello fella's. I would like to invite everyone to vote for jinja2
>>>> and
>>>> >> > flask
>>>> >> > support in the pycharm IDE. Those, like me, that use pycharm with
>>>> flask,
>>>> >> > would benefit deeply of it.
>>>> >> >
>>>> >> > --
>>>> >> > "A arrogância é a arma dos fracos."
>>>> >> >
>>>> >> > ===========================
>>>> >> > Italo Moreira Campelo Maia
>>>> >> > Bacharel em Ciência da Computação - UECE
>>>> >> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>>> >> > Coordenador do Pug-CE
>>>> >> > -----------------------------------------------------
>>>> >> > http://www.italomaia.com/
>>>> >> > http://twitter.com/italomaia/
>>>> >> > http://eusouolobomau.blogspot.com/
>>>> >> > -----------------------------------------------------
>>>> >> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>>> >> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>>> >> > ===========================
>>>> >> >
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Skype: petermanser
>>>> >> Web: http://petermanser.ch
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > "A arrogância é a arma dos fracos."
>>>> >
>>>> > ===========================
>>>> > Italo Moreira Campelo Maia
>>>> > Bacharel em Ciência da Computação - UECE
>>>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>>> > Coordenador do Pug-CE
>>>> > -----------------------------------------------------
>>>> > http://www.italomaia.com/
>>>> > http://twitter.com/italomaia/
>>>> > http://eusouolobomau.blogspot.com/
>>>> > -----------------------------------------------------
>>>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>>> > ===========================
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Skype: petermanser
>>>> Web: http://petermanser.ch
>>>>
>>>
>>>
>>
>>
>> --
>> Chant Hare Krishna and Be Happy
>>
>> Eka
>>
>
>


-- 
Chant Hare Krishna and Be Happy

Eka

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Alex K
Date:
2011-09-16 @ 13:16
not, I use it without virtualenv.


On Fri, Sep 16, 2011 at 4:22 PM, Eka (Esteban Feldman) <
ekagaurangadas@gmail.com> wrote:

> Alex:
>
> in bash are you using a special PYTHONPATH? Virtualenv? you can specify
> that in PyCharm. I use virtualenv and tell PyCharm that my python
> interpreter is the python bin from my virtualenv and that satisfy all the
> Paths
>
>
> On Fri, Sep 16, 2011 at 9:13 AM, Alex K <lestatcheb@googlemail.com> wrote:
>
>> I tried run debug on runserver.py with this code:
>> from app import app
>>
>> def run_app(app, host='0.0.0.0', port=8888):
>>     app.run(port=port)
>>
>> if __name__ == '__main__':
>>     run_app(app)
>>
>>
>>
>>
>> but PyCharm print error:
>>
>> /usr/bin/python2.7 /home/code/runserver.py
>> Traceback (most recent call last):
>>   File "/home/code/runserver.py", line 1, in <module>
>>     from app import app
>>   File "/home/code/app/__init__.py", line 7, in <module>
>>     from flaskext.sqlalchemy import SQLAlchemy
>>   File "/usr/lib/python2.7/site-packages/flaskext/sqlalchemy.py", line 17,
>> in <module>
>>     import sqlalchemy
>>   File "/usr/lib/python2.7/site-packages/flaskext/sqlalchemy.py", line 24,
>> in <module>
>>     from sqlalchemy import orm
>> ImportError: cannot import name orm
>>
>> but in bash python runserver.py works.
>>
>> I don't know how to fix it...
>>
>>
>>
>>
>> On Fri, Sep 16, 2011 at 3:59 PM, Eka (Esteban Feldman) <
>> ekagaurangadas@gmail.com> wrote:
>>
>>> Alex: I run it as a normal python process, no need for special config on
>>> PyCharm side AFAIK. Then you run it as debug, place your breakpoints and you
>>> are done.
>>> That's the good thing about Flask :)
>>>
>>> E
>>>
>>> On Fri, Sep 16, 2011 at 3:26 AM, Alex K <lestatcheb@googlemail.com>wrote:
>>>
>>>> Anyone know PyCharm support debug for Flask runserver?
>>>> I want step-by-step watch variables and etc without insert code with
>>>> print or assert False.
>>>>
>>>>
>>>>
>>>>
>>>> On Thu, Sep 15, 2011 at 7:58 PM, Peter Manser <mail@petermanser.ch>wrote:
>>>>
>>>>> Log in and open the issue. (you need to be logged in to vote/see
>>>>> comments)
>>>>>
>>>>> On Thu, Sep 15, 2011 at 5:55 PM, Italo Maia <italo.maia@gmail.com>
>>>>> wrote:
>>>>> > But, there are no comments. Didn't understand.
>>>>> >
>>>>> > 2011/9/15 Peter Manser <mail@petermanser.ch>
>>>>> >>
>>>>> >> Little tip: If you want such features implemented, you should really
>>>>> >> read/answer the comments by the developers of pycharm. See here
>>>>> >> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the
>>>>> comment
>>>>> >> by Dmitry Jemerov.
>>>>> >>
>>>>> >>
>>>>> >> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>>>>> >> > Hello fella's. I would like to invite everyone to vote for jinja2
>>>>> and
>>>>> >> > flask
>>>>> >> > support in the pycharm IDE. Those, like me, that use pycharm with
>>>>> flask,
>>>>> >> > would benefit deeply of it.
>>>>> >> >
>>>>> >> > --
>>>>> >> > "A arrogância é a arma dos fracos."
>>>>> >> >
>>>>> >> > ===========================
>>>>> >> > Italo Moreira Campelo Maia
>>>>> >> > Bacharel em Ciência da Computação - UECE
>>>>> >> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>>>> >> > Coordenador do Pug-CE
>>>>> >> > -----------------------------------------------------
>>>>> >> > http://www.italomaia.com/
>>>>> >> > http://twitter.com/italomaia/
>>>>> >> > http://eusouolobomau.blogspot.com/
>>>>> >> > -----------------------------------------------------
>>>>> >> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>>>> >> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>>>> >> > ===========================
>>>>> >> >
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> --
>>>>> >> Skype: petermanser
>>>>> >> Web: http://petermanser.ch
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > "A arrogância é a arma dos fracos."
>>>>> >
>>>>> > ===========================
>>>>> > Italo Moreira Campelo Maia
>>>>> > Bacharel em Ciência da Computação - UECE
>>>>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>>>> > Coordenador do Pug-CE
>>>>> > -----------------------------------------------------
>>>>> > http://www.italomaia.com/
>>>>> > http://twitter.com/italomaia/
>>>>> > http://eusouolobomau.blogspot.com/
>>>>> > -----------------------------------------------------
>>>>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>>>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>>>> > ===========================
>>>>> >
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Skype: petermanser
>>>>> Web: http://petermanser.ch
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Chant Hare Krishna and Be Happy
>>>
>>> Eka
>>>
>>
>>
>
>
> --
> Chant Hare Krishna and Be Happy
>
> Eka
>

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Italo Maia
Date:
2011-09-15 @ 15:56
Pycharm support guy told me to "vote" for the issue in order to get it
implemented.

2011/9/15 Italo Maia <italo.maia@gmail.com>

> But, there are no comments. Didn't understand.
>
>
> 2011/9/15 Peter Manser <mail@petermanser.ch>
>
>> Little tip: If you want such features implemented, you should really
>> read/answer the comments by the developers of pycharm. See here
>> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
>> by Dmitry Jemerov.
>>
>>
>> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>> > Hello fella's. I would like to invite everyone to vote for jinja2 and
>> flask
>> > support in the pycharm IDE. Those, like me, that use pycharm with flask,
>> > would benefit deeply of it.
>> >
>> > --
>> > "A arrogância é a arma dos fracos."
>> >
>> > ===========================
>> > Italo Moreira Campelo Maia
>> > Bacharel em Ciência da Computação - UECE
>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>> > Coordenador do Pug-CE
>> > -----------------------------------------------------
>> > http://www.italomaia.com/
>> > http://twitter.com/italomaia/
>> > http://eusouolobomau.blogspot.com/
>> > -----------------------------------------------------
>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>> > ===========================
>> >
>>
>>
>>
>> --
>> Skype: petermanser
>> Web: http://petermanser.ch
>>
>
>
>
> --
> "A arrogância é a arma dos fracos."
>
> ===========================
> Italo Moreira Campelo Maia
> Bacharel em Ciência da Computação - UECE
> Desenvolvedor WEB e Desktop (Java, Python, Lua)
> Coordenador do Pug-CE
> -----------------------------------------------------
> http://www.italomaia.com/
> http://twitter.com/italomaia/
> http://eusouolobomau.blogspot.com/
> -----------------------------------------------------
> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> Turtle Linux 10.10 - http://bit.ly/cEw4ET
> ===========================
>



-- 
"A arrogância é a arma dos fracos."

===========================
Italo Moreira Campelo Maia
Bacharel em Ciência da Computação - UECE
Desenvolvedor WEB e Desktop (Java, Python, Lua)
Coordenador do Pug-CE
-----------------------------------------------------
http://www.italomaia.com/
http://twitter.com/italomaia/
http://eusouolobomau.blogspot.com/
-----------------------------------------------------
Turtle Linux  9.10 - http://tiny.cc/blogturtle910
Turtle Linux 10.10 - http://bit.ly/cEw4ET
===========================

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Александр Карев
Date:
2011-09-15 @ 16:01
comments show only for authorized users.

I don't know what concrete features of Flask need support.

On Thu, Sep 15, 2011 at 7:56 PM, Italo Maia <italo.maia@gmail.com> wrote:

> Pycharm support guy told me to "vote" for the issue in order to get it
> implemented.
>
>
> 2011/9/15 Italo Maia <italo.maia@gmail.com>
>
>> But, there are no comments. Didn't understand.
>>
>>
>> 2011/9/15 Peter Manser <mail@petermanser.ch>
>>
>>> Little tip: If you want such features implemented, you should really
>>> read/answer the comments by the developers of pycharm. See here
>>> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
>>> by Dmitry Jemerov.
>>>
>>>
>>> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>>> > Hello fella's. I would like to invite everyone to vote for jinja2 and
>>> flask
>>> > support in the pycharm IDE. Those, like me, that use pycharm with
>>> flask,
>>> > would benefit deeply of it.
>>> >
>>> > --
>>> > "A arrogância é a arma dos fracos."
>>> >
>>> > ===========================
>>> > Italo Moreira Campelo Maia
>>> > Bacharel em Ciência da Computação - UECE
>>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>> > Coordenador do Pug-CE
>>> > -----------------------------------------------------
>>> > http://www.italomaia.com/
>>> > http://twitter.com/italomaia/
>>> > http://eusouolobomau.blogspot.com/
>>> > -----------------------------------------------------
>>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>> > ===========================
>>> >
>>>
>>>
>>>
>>> --
>>> Skype: petermanser
>>> Web: http://petermanser.ch
>>>
>>
>>
>>
>> --
>> "A arrogância é a arma dos fracos."
>>
>> ===========================
>> Italo Moreira Campelo Maia
>> Bacharel em Ciência da Computação - UECE
>> Desenvolvedor WEB e Desktop (Java, Python, Lua)
>> Coordenador do Pug-CE
>> -----------------------------------------------------
>> http://www.italomaia.com/
>> http://twitter.com/italomaia/
>> http://eusouolobomau.blogspot.com/
>> -----------------------------------------------------
>> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>> Turtle Linux 10.10 - http://bit.ly/cEw4ET
>> ===========================
>>
>
>
>
> --
> "A arrogância é a arma dos fracos."
>
> ===========================
> Italo Moreira Campelo Maia
> Bacharel em Ciência da Computação - UECE
> Desenvolvedor WEB e Desktop (Java, Python, Lua)
> Coordenador do Pug-CE
> -----------------------------------------------------
> http://www.italomaia.com/
> http://twitter.com/italomaia/
> http://eusouolobomau.blogspot.com/
> -----------------------------------------------------
> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> Turtle Linux 10.10 - http://bit.ly/cEw4ET
> ===========================
>

Re: [flask] [OFF?] Pycharm new features - Flask and Jinja2!

From:
Italo Maia
Date:
2011-09-15 @ 16:00
ps: comments visible only to logged users, that's why i wasn't seeing them.

2011/9/15 Italo Maia <italo.maia@gmail.com>

> Pycharm support guy told me to "vote" for the issue in order to get it
> implemented.
>
>
> 2011/9/15 Italo Maia <italo.maia@gmail.com>
>
>> But, there are no comments. Didn't understand.
>>
>>
>> 2011/9/15 Peter Manser <mail@petermanser.ch>
>>
>>> Little tip: If you want such features implemented, you should really
>>> read/answer the comments by the developers of pycharm. See here
>>> http://youtrack.jetbrains.net/issue/PY-2248#tab=Comments , the comment
>>> by Dmitry Jemerov.
>>>
>>>
>>> 2011/9/15 Italo Maia <italo.maia@gmail.com>:
>>> > Hello fella's. I would like to invite everyone to vote for jinja2 and
>>> flask
>>> > support in the pycharm IDE. Those, like me, that use pycharm with
>>> flask,
>>> > would benefit deeply of it.
>>> >
>>> > --
>>> > "A arrogância é a arma dos fracos."
>>> >
>>> > ===========================
>>> > Italo Moreira Campelo Maia
>>> > Bacharel em Ciência da Computação - UECE
>>> > Desenvolvedor WEB e Desktop (Java, Python, Lua)
>>> > Coordenador do Pug-CE
>>> > -----------------------------------------------------
>>> > http://www.italomaia.com/
>>> > http://twitter.com/italomaia/
>>> > http://eusouolobomau.blogspot.com/
>>> > -----------------------------------------------------
>>> > Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>>> > Turtle Linux 10.10 - http://bit.ly/cEw4ET
>>> > ===========================
>>> >
>>>
>>>
>>>
>>> --
>>> Skype: petermanser
>>> Web: http://petermanser.ch
>>>
>>
>>
>>
>> --
>> "A arrogância é a arma dos fracos."
>>
>> ===========================
>> Italo Moreira Campelo Maia
>> Bacharel em Ciência da Computação - UECE
>> Desenvolvedor WEB e Desktop (Java, Python, Lua)
>> Coordenador do Pug-CE
>> -----------------------------------------------------
>> http://www.italomaia.com/
>> http://twitter.com/italomaia/
>> http://eusouolobomau.blogspot.com/
>> -----------------------------------------------------
>> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
>> Turtle Linux 10.10 - http://bit.ly/cEw4ET
>> ===========================
>>
>
>
>
> --
> "A arrogância é a arma dos fracos."
>
> ===========================
> Italo Moreira Campelo Maia
> Bacharel em Ciência da Computação - UECE
> Desenvolvedor WEB e Desktop (Java, Python, Lua)
> Coordenador do Pug-CE
> -----------------------------------------------------
> http://www.italomaia.com/
> http://twitter.com/italomaia/
> http://eusouolobomau.blogspot.com/
> -----------------------------------------------------
> Turtle Linux  9.10 - http://tiny.cc/blogturtle910
> Turtle Linux 10.10 - http://bit.ly/cEw4ET
> ===========================
>



-- 
"A arrogância é a arma dos fracos."

===========================
Italo Moreira Campelo Maia
Bacharel em Ciência da Computação - UECE
Desenvolvedor WEB e Desktop (Java, Python, Lua)
Coordenador do Pug-CE
-----------------------------------------------------
http://www.italomaia.com/
http://twitter.com/italomaia/
http://eusouolobomau.blogspot.com/
-----------------------------------------------------
Turtle Linux  9.10 - http://tiny.cc/blogturtle910
Turtle Linux 10.10 - http://bit.ly/cEw4ET
===========================